The Walk Through Detectors Classic Metal Detector The Classic is a Walk-Through Metal Detector designed and engineered to meet the specific security needs of public facilities such as schools, hotels, amusement parks and city halls. The Classic Metal Detector combines the required Security with a high level of operating efficiency. The leading edge technology features a high flow rate of people through the gate with the minimum number of nuisance alarms, as personal effects such as coins, keys and belt buckles can pass through the magnetic field without causing an alarm. The Classic Metal Detector is compact and lightweight, making this portable unit adaptable to any surroundings. The patented cylinder design is aesthetically suitable for the most discrete applications. This security equipment does not require any special training for normal use, making this the most ‘user friendly walk-through Metal Detector in the industry. This Metal Detector has been selected by the leading security agencies worldwide to protect highranking government officials. The Classic conforms to all International Security Standards and is capable of detecting both magnetic and non-magnetic weapons. When security, operating efficiency and affordable pricing are required, the Classic Metal Detector is the obvious solution. Main features Digitally adjustable sensitivity with a wide range of values. All functions are controlled by a microprocessor. Programming access protected by hardware key. Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm from each other, without using cables. Professional high integration and high reliability electronics. Control unit incorporated in the detector. No initial or periodic calibration. Easy maintenance. Modular control unit for a rapid replacement. Colour: light grey RAL 7040. Installation Data Power Supply: 115 VAC (230 VAC available on request) +10/-20%, 45-65 Hz, 20 VA MAX. Operating temperature: from -20°C to +70°C Relative humidity: from 0 to 95% (without condensation). Alarms Visible Signals High intensity display. Green and red metering signals proportional to the mass of the object detected. Audible Signals High acoustic intensity alarm signal. Volume and tone of alarm signal are programmable Certification and Conformity Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Conforms to the current International Security Standards for Walk Through Metal Detectors. Complies with EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC). Download the Documentation   Classic - Navy Metal detector The Classic/Navy is a Walk-Through Metal Detector designed and engineered to meet the specific security needs of facilities like Cruise Ship. The Classic/Navy Metal Detector combines the required Security with a high level of operating efficiency. The leading edge technology features a high flow rate of people through the gate with the minimum number of nuisance alarms, as personal effects such as coins, keys and belt buckles can pass through the magnetic field without causing an alarm. The Classic/Navy Metal Detector is compact and lightweight, making this portable unit adaptable to any surroundings. The patented cylinder design is aesthetically suitable for the most discrete applications. This security equipment does not require any special training for normal use, making this the most ‘user friendly walk-through Metal Detector in the industry. This Metal Detectors has been selected by the leading security agencies worldwide to protect highranking government officials. The Classic/Navy conforms to all International Security Standards and is capable of detecting both magnetic and non-magnetic weapons. When security, operating efficiency and affordable pricing are required, the Classic/Navy Metal Detector is the obvious solution. Main Features Digitally adjustable sensitivity with a wide range of values. All functions are controlled by a microprocessor. Programming access protected by hardware key. Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm from each other, without using cables. Professional high integration and high reliability electronics. Control unit incorporated in the detector. No initial or periodic calibration. Easy maintenance. Modular control unit for a rapid replacement. Colour: light grey RAL 7040. Installation Data Power Supply: 115 VAC (230 VAC available on request) +10/-20%, 45-65 Hz, 20 VA MAX. Operating temperature: from -20°C to +70°C Relative humidity: from 0 to 95% (without condensation). Alarms Visible Signals High intensity display. Green and red metering signals proportional to the mass of the object detected. Audible Signals High acoustic intensity alarm signal. Volume and tone of alarm signal are programmable Certification and Conformity Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Conforms to the current International Security Standards for Walk Through Metal Detectors. Complies with EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC). Download the Documentation   Hi-Pe Elliptic The transit of metal personal effects in common daily use through Metal Detector checkpoints generates signals which often exceed those of some types of fire-arm available on the market. Discrimination of these by the Metal Detector therefore becomes a necessary condition for establishing access systems with high flow rates. As a solution to this problem, the new HI-PE/CF Elliptic Metal Detector, with its detection functions based on an innovative signal analysis system, raises the threshold of discrimination between medium-sized fire-arms and personal effects to a level up to 400% above that of the 02PN8 HI-PE model. The advantages of using this new Metal Detector are the following: a notable reduction in the need for branch staff to act to check inward- and outward-bound traffic; increase in convenience of access to the bank for customers; and, not least, the opportunity to increase the level of security. Statistical data obtained in real operating situations with the HI-PE/CF Elliptic Metal Detector have demonstrated the almost total elimination of false alarms compared with earlier systems, at the same level of detection capability relating to fire-arms of conventional construction and in light metal.       Main Features: Digitally adjustable sensitivity with a wide range of values International Standards: Direct selection of the International Security Standards Very high discrimination Very high immunity to electromagnetic and mechanical interference All functions programmable and controlled by a microprocessor Programming: via built-in keypad and RDU or RS-232 serial connection to PC or computer network Programming access protected by both a mechanical lock and by two software level passwords Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm, from each other, without using cables Professional high integration and high reliability electronics Electronic control unit separated from the archway Download the Documentation   5 Hi-Pe Multizone The HI-PE Multi Zone is a high performance walk-through Metal Detector which exceeds all International Security Standards. A “height on person” display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. Three operating modes are available: Floating (standard): the location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution; 8-Zones and 4-Zones: the alarm threshold can be adjusted individually for each zone. The panels are washable and they are equipped with shock absorbent edges to protect them against damages. HI-PE Multi Zone can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The HI-PE Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures. Main Features: Immediate selection of International Security Standards. Detection of magnetic, non-magnetic and mixed alloys metal weapons. High detection speed: up to 15 m/s (45 ft/s). Very high immunity to both electrical and mechanical interference. Programmable operation controlled by microprocessor. Programming: via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), PC or computer network. Programming access protected by a mechanical lock and two alphanumeric passwords. Cable-free automatic synchronisation between two or more Metal Detectors at a minimum distance of 5 cm (2 inches) from each other. High-integration professional electronics and maximum reliability. Control unit incorporated into the detector. No need for initial or periodic calibration. Easy maintenance: modular control unit for a rapid replacement. Colour: light grey RAL 7040. Installation Data Power Supply: 115 / 230 VAC, ±15%, 45-65 Hz, 30 VA MAX. External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computeror an external modem. Operating temperature: from -20°C to +70°C. Relative humidity: from 0 to 95% (without condensation). Certification and Conformity Harmless to wearers of pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Conforms to the current International Security Standards for Walk-Through Metal Detectors. Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC). Alarms Visible Signals Multi-zone display bar for “height on person” localisation. High intensity display. Green and red metering signals proportional to the mass of the object detected. High acoustic intensity alarm signal. Volume and tone of alarm signal can be programmed Download the Documentation   PMD2 Multizone Very High Performance Multi-Zone Metal Detector PMD2, acronym for Programmable Metal Detector, is the most advanced application with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations. A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution. Use of the PMD2 ensures an extremely high level of discrimination of metal personal effects. PMD2 can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a power failure. PMD2 is available in panel (PMD2/PTZ) or column (PMD2/ENZ) version. Also an outdoor column version, PMD2/EWZ, is offered with an IP65 degree of protection. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The PMD2 is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures. Main features Detection of firearms in magnetic and non-magnetic metals and mixed alloys. High transit flow-rate thanks to the discrimination of metal personal effects. Direct selection of International Security Standards. Programmable operation controlled by microprocessor. Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network. Access to programming protected by mechanical lock. High detection speed: up to 15 m/s. High immunity to mechanical and electromagnetic interference. Installation Data Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 30 VA max. External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors Operating temperature: from -20°C to +70°C Relative humidity: from 0 to 95% (without condensation). Certification and conformity Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Conforms to the current International Security Standards for Walk-Through Metal Detectors. Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC). Alarms Visible signals Multi-zone display bar for “height on person” localization. High intensity display. Green and red metering signals proportional to the mass of the object detected. Audible signals High acoustic intensity alarm signal. Volume and tone of alarm signal can be programmed. Download the Documentation   PMD2 Elliptic Very High Performance Multi-Zone Metal Detector PMD2, acronym for Programmable Metal Detector, is the most advanced application with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations. A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of Metal Detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution. Use of the PMD2 ensures an extremely high level of discrimination of metal personal effects. PMD2 can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a power failure. PMD2 is available in panel (PMD2/PTZ) or column (PMD2/ENZ) version. Also an outdoor column version, PMD2/EWZ, is offered with an IP65 degree of protection. A photocell transit counter is available as an option. This will allow for statistical data to be accumulated on the persons passing through the detector. The detector’s control unit is incorporated into the structure. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The PMD2 is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures. Main features Detection of firearms in magnetic and non-magnetic metals and mixed alloys. High transit flow-rate thanks to the discrimination of metal personal effects. Direct selection of International Security Standards. Programmable operation controlled by microprocessor. Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network. Access to programming protected by mechanical lock. High detection speed: up to 15 m/s. High immunity to mechanical and electromagnetic interference. Installation Data Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 30 VA max. External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors Operating temperature: from -20°C to +70°C Relative humidity: from 0 to 95% (without condensation). Certification and conformity Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Conforms to the current International Security Standards for Walk-Through Metal Detectors. Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC). Alarms Visible signals Multi-zone display bar for “height on person” localization. High intensity display. Green and red metering signals proportional to the mass of the object detected. Audible signals High acoustic intensity alarm signal. Volume and tone of alarm signal can be programmed Download the Documentation   SMD 600 Multizone Ultra High Sensitivity Metal Detector The SMD600 Multi Zone is a new-generation ultra-high sensitivity Walk-Through Metal Detector designed to satisfy the strictest security requirements, especially in penitentiaries and other applications where the detection of extremely small metal masses is required (for example: loss prevention), even if hidden in body cavities. It meets all International Security Standards currently adopted in public and private installations. The SMD600 Multi Zone is characterised by very high immunity to electrical interference in the surrounding environment as well as mechanical vibrations; as a result, it can be installed in those environments where the standard Metal Detectors could not be installed before. A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of manual searches. The Anti-Vandalism Control Unit (IP65 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The SMD600 Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.   Main Features Very high sensitivity for detection of small metal objects normally difficult to detect. Very high immunity to mechanical and electromagnetic interference. Control unit incorporated in the structure of the Metal Detector in anti-vandalism version (IP65 in stainless steel). Direct selection of International Security Standards. Programmable operation controlled by microprocessor. Programming using incorporated keypad and display or via RS-232 serial connection by Remote Control Unit (RCU2), personal computer or computer network. Access to programming protected by mechanical lock. High detection speed: up to 15 m/s. Automatic synchronization of two or more Metal Detectors at a reciprocal distance down to 5 cm without using cables. Professional high-integration, highly reliable electronics. No initial or periodic calibration. Easy maintenance: modular electronic control unit for easy replacement. Light grey colour RAL 7040. Installation Data Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 30 VA max. External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors Operating temperature: from -20°C to +70°C Relative humidity: from 0 to 95% (without condensation). Certification and conformity Complies with Regulations relating to pacemakers, defibrillators or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar). Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC). Alarms Visible signals Multi-zone display bar for “height on person” localization. High intensity display. Green and red metering signals proportional to the mass of the object detected. Audible signals High acoustic intensity alarm signal. Volume and tone of alarm signal can be programmed Download the Documentation   SMD 601 Multizone The Most Advanced Multi-Zone Metal Detector for Law Enforcement and Correctional Facilities The SMD601TM is a Multi-Zone Walk-Through Metal Detector specifically designed to comply with the new NIJ Standard-0601.02 (U.S. Dep. of Justice). The Standard establishes new requirements of Sensitivity, Discrimination and Immunity for Law Enforcement and Correctional Facilities. This is an extremely sensitive device for the detection of conventional weapons, such as pistols and knives, as well as small, hard-to-find items, normally difficult to detect, that could be considered a threat to officer and prisoner safety. The three levels of Security specified by the Standard (Large, Medium and Small object size) are pre-loaded in the Metal Detector, and can be selected directly by the user via a simple operation at the control unit. A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of the need for manual searches. The Anti-Vandalism Control Unit (IP65 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.   Main Features Immediate selection (parameter IS) of Security Levels specified by NIJ Standard-0601.02. Additional Threat Levels selectable by Chip-Card. Detection of magnetic, non-magnetic and mixed alloys metal weapons. All functions programmable and controlled by a microprocessor. Photocell transit counter and automatic alarm rate calculation. Programming: via built-in keypad and display or RS-232 serial connection to Remote Control Unit (RCU2), a PC or a computer network. Programming access protected by both a mechanical lock and by two alphanumeric passwords. High speed of detection: up to 15 meters per second. Very high immunity to electromagnetic and mechanical interference. Automatic synchronization between two or more Metal Detectors, at a distance of down to 20 cm, from each other, without using cables. Professional high integration and high reliability electronics. Control unit incorporated into the detector. No initial or periodic calibration. Easy maintenance: modular control unit for a rapid replacement. Colour: light grey RAL 7040. Installation Data Power Supply: 115 / 230 VAC, ±15%, 50 ... 60 Hz, 40 VA max. External interface: RS-232C for connection to a Remote Control Unit (RCU2), a terminal, a computer, an external modem or other CEIA Metal Detectors Operating temperature: from -20°C to +70°C. Relative humidity: from 0 to 95% (without condensation). Certification and conformity Compliant with the Human Exposure Safety Requirements specifi ed by NIJ Standard-0601.02. Complies with EC Regulations and International Standards relating to Electrical Safety and Electromagnetic Compatibility (EMC). Alarms Visible signals Multi-zone display bar for “height on person” localization. High intensity display. Green and red metering signals proportional to the mass of the object detected. Audible signals High acoustic intensity alarm signal. Volume and tone of alarm signal can be programmed. Download the Documentation   M-SCOPE M-SCOPE provides portable security solutions worldwide. It is the worlds most versatile walkthrough metal detector. M-SCOPE offers an intelligent, dynamic and effective security solution Key features: • Indoor or outdoor use • User friendly control panel with programmable memory • 40 hours battery life • Self test/automatic calibration at turn ON • 3 sensor zones with LEDs • 100 levels of adjustable sensitivity • Transit counter • Digital I/O • Keypad with security access control (lock out) • LED bar graph for target strength • LCD for keypad interaction   General specifications: • Portable dimensions: 90 x 58 x 66 (cm) • Inner dimensions: h 200 x d 80 x w 90 (cm) • Outer dimensions: h 220 x d 120 x w 90 (cm) • Weight: 45 kg • IP 42 protection standard • Operating temperature: -20° to +70°C • Relative humidity 95% non condensing Certifications: • FAA, NILECJ-0601.00 Alarms: • Optical and acoustic Options: • Pop up shelter • Floor mat • Mat and bases with built-in levelers • Y cable assembly allows both batteries to be charged Download the Documentation     Up